%
 (     ****Inductor Bracket Outline, Version 2 ****     )
N1G17G20G40G49                        (XY plane, Inches, Radius Comp Off, Tool Length Off)
N2G54G80G90G94                        (Cooridinate System 1, Motion "Canned" Mode Off, Absolute Distance, Units per Minute)
N6M05M09                              (Spindle Off, Coolant Off)

(*** .125 Endmill ***)
g28
t11m6
g43h11                                 (Tool Length Offset 4 On)
g0    x 0.00000 y 0.00000 z 1.00000
s2500m3

g41d11                                 (Radius Comp. 4, Left)

g0  x-1.00000  y 0.83200  z 0.05000
f3
g1  x-0.83174
                          z-0.03125
f5
g1  x 0.50474
g3  x 0.60727  y 0.87447                        j 0.14500
g1  x 1.26440  y 1.53160
g2  x 1.52013  y 1.37031             i 0.10960  j-0.10960
g1  x 1.04437  y 0.02526
g2  x 0.47400  y-0.37800             i-0.57037  j 0.20174
g1  x-0.74347
g3  x-0.84600  y-0.42047                        j-0.14500
g1  x-1.45427  y-1.02873
g2  x-1.77600  y-1.16200             i-0.32173  j 0.32173
g2  x-1.77600  y-0.85200                        j 0.15500
g3  x-1.63100  y-0.70700                        j 0.14500
g1             y 0.87700
g3  x-1.64911  y 0.94716             i-0.14500
g1  x-1.91165  y 1.42200
g2  x-1.66640  y 1.60660             i 0.13565  j 0.07500
g1  x-0.93427  y 0.87447
g3  x-0.83174  y 0.83200             i 0.10253  j 0.10253

g1                        z-0.06250
g1  x 0.50474
g3  x 0.60727  y 0.87447                        j 0.14500
g1  x 1.26440  y 1.53160
g2  x 1.52013  y 1.37031             i 0.10960  j-0.10960
g1  x 1.04437  y 0.02526
g2  x 0.47400  y-0.37800             i-0.57037  j 0.20174
g1  x-0.74347
g3  x-0.84600  y-0.42047                        j-0.14500
g1  x-1.45427  y-1.02873
g2  x-1.77600  y-1.16200             i-0.32173  j 0.32173
g2  x-1.77600  y-0.85200                        j 0.15500
g3  x-1.63100  y-0.70700                        j 0.14500
g1             y 0.87700
g3  x-1.64911  y 0.94716             i-0.14500
g1  x-1.91165  y 1.42200
g2  x-1.66640  y 1.60660             i 0.13565  j 0.07500
g1  x-0.93427  y 0.87447

f3
g3  x-0.83174  y 0.82700             i 0.10965  j 0.10236 (Lead-in to Finish Pass)

g1  x 0.50474
g3  x 0.61080  y 0.87093                        j 0.15000
g1  x 1.26793  y 1.52807
g2  x 1.51542  y 1.37198             i 0.10607  j-0.10607
g1  x 1.03966  y 0.02692
g2  x 0.47400  y-0.37300             i-0.56566  j 0.20008
g1  x-0.74347
g3  x-0.84954  y-0.41693                        j-0.15000
g1  x-1.45780  y-1.02520
g2  x-1.77600  y-1.15700             i-0.31820  j 0.31820
g2  x-1.77600  y-0.85700                        j 0.15000
g3  x-1.62600  y-0.70700                        j 0.15000
g1             y 0.87700
g3  x-1.64473  y 0.94958             i-0.15000
g1  x-1.90727  y 1.42442
g2  x-1.66993  y 1.60307             i 0.13127  j 0.07258
g1  x-0.93780  y 0.87093
g3  x-0.79333  y 0.83200             i 0.10607  j 0.10607
g0                        z 1.00000
m5 g40 g49
g28

%